Polyferric sulfate is a cationic inorganic polymer flocculant with multiple hydroxyl groups and nuclei. PFS can be quickly mixed with water in any ratio, and it has a larger molecular weight than general inorganic coagulants. When used as a water treatment agent, it has strong adsorption, flocculation bridging, coagulation and precipitation properties. Moreover, the formation of flocs is large and fast, the flocs are not easily broken, the coagulation performance is good, the filtered water after precipitation is fast, and the pH range of purified water is wide.

Product performance:

1. High efficiency: Polyferric sulfate is a composite polymer with a large molecular structure and strong adsorption capacity. Its water purification effect is superior to all traditional inorganic water purification agents.

2. Quick: The floc formed after adding raw water is large, with fast sedimentation rate, high activity, and good filtration performance.

3. Strong adaptability: Strong adaptability to various types of raw water, with minimal impact on the pH value of water (pH 4-11). Regardless of the turbidity of the raw water or the concentration of pollutants in the wastewater, its purification effect is significant.

4. Low dosage: Corrosive to equipment and pipelines, easy to operate, small dosage, and low purification cost.

Controllability. It is red in color and can be visually perceived if added excessively, reducing waste.

Usage:

1. Before use Pour this product into the alum tank at a certain concentration (10-30%), add tap water and stir to fully hydrolyze it, let it stand until it turns into a reddish brown liquid, then dilute it with water to the desired concentration and add it for coagulation. Water plants can also be directly added at 2-5%, and industrial wastewater treatment can be directly added at 5-10%.

2. The determination of the dosage and the calculation of the dosage of polymeric ferric sulfate can be determined based on the properties of the raw water through production debugging or burning experiments, depending on the appropriate amount of alum formation The water treatment plant can use the original dosage of other chemicals as a reference. Under the same conditions, the dosage of this product is slightly lower than that of solid polyaluminum sulfate, which is 1/3-1/4 of the dosage of solid aluminum sulfate. If the original liquid product is used, it can be calculated based on the corresponding concentration of the drug.

3. When in use, pump the prepared medicine into the measuring tank and mix it with the raw water through metering.

4. Generally, it is prepared and used on the same day, and tap water is required for medication preparation. Slight sediment is a normal phenomenon.

Packaging and Storage:

The solid is packaged in 25kg bags, with an inner plastic film and an outer plastic woven bag. The product should be stored indoors in a dry, ventilated, and cool place, and should not be damp. It is strictly prohibited to store it together with flammable, corrosive, or toxic substances.