Product Introduction

HBQF-F1 Deep Defluorination Agent is a reagent specially developed to solve the problem of low-concentration fluorine-containing wastewater. It is suitable for the treatment of fluoride exceeding the standard in wastewater from various industries, focusing on the deep treatment stage, with stable effluent reaching the standard <1mg/L.

Product Features

1. Specifically targets low-concentration fluoride (≤ 20mg/L) wastewater for upgrading and deep treatment;

2. Compared with other defluorination agents, the dosage is reduced by 30-50%, and the sludge volume is reduced by 30-50%;

3. Can replace resin and adsorbents, greatly reducing the occupied area and investment cost;

4. The product has extremely low hardness and is not easy to cause blockage of system pipelines and other components;

5. The product contains no free aluminum ions, and the filter press liquor has no effect on the biochemical system;

6. Simple treatment equipment, the effect is visible after adding, no complex debugging is needed;

7. Fast reaction speed, only 10-15 min, the removal rate can reach more than 98%.

Project Indicators

Applications

It can be used for the purification of high-fluorine water and high-oil wastewater, and has wide applications in photovoltaics, organosilicon, dyeing, medicine, leather, oil fields, papermaking, etc. It is particularly effective for the treatment of low-temperature, low-turbidity, and alkaline water.

Usage

(1) Small Test:

1. Detect the fluoride content of wastewater;

2. Add liquid deep defluorination agent HBQF-F1 (the following dosage can reduce fluorine to below 1mg/L);

3. Stir and react for 10 minutes;

4. Adjust the pH value to 6-7 with acid or alkali;

5. Add a certain amount of 1‰ anionic PAM until the mud and water separation is obvious, and then settle;

6. Detect the fluoride content of the supernatant.

(2) On-site Use

1. Determine the dosage based on the small test;

2. When treating wastewater on-site, add according to the scheme provided by our company.

Packaging, Storage and Precautions

1. 30T tank truck loading;

2. Store in a cool, dry, and well-ventilated place;

3. The product is acidic (contains a small amount of chloride ions). Storage tanks, dosing barrels, pumps, and pipelines should be corrosion-resistant. Plastic, resin materials, etc., or anti-corrosion treatment can be selected;

4. When using, wear rubber protective gloves, wear a filter-type protective mask, and wear protective clothing.